DT5035-German Kunco KUHNKE D54 ROL-N DC24V100ED rotation angle electromagnet
According to the original product, the parameters and dimensions are exactly the same, which greatly saves the import time cycle and manufacturing cost. It can be supplied in large quantities, and other types of products can also be customized.
Main body diameter 50 thickness 35 (mm) movable shaft 6mm
Rotating electromagnet products can be divided into counterclockwise and clockwise rotation state, please pay attention to distinguish when choosing
There is no axial displacement when rotating after power-on, the rotation angle can reach 0-45 degrees, and other angles can also be customized
The CNC machined helical surface is used to make it smooth without axial displacement and not stuck when rotating.
According to the principle of electromagnetic pull-in, the inclined plane structure is adopted. When the electric pull-in is turned on, the inclined plane is used to make it rotate angularly, and the torque without axial displacement is output. When the coil is energized, the iron core and the armature are magnetized to become two magnets with opposite polarities, and an electromagnetic attraction force is generated between them. When the suction force is greater than the reaction force of the spring, the armature begins to move toward the iron core. When the current in the coil is less than a certain value or the power supply is interrupted, the electromagnetic attraction force is less than the reaction force of the spring, and the armature will return to the original release position under the action of the reaction force.
The installation method is threaded holes on the side of the main body, or customized to other installation methods
The working system is divided into: long-term working system, short-term working system and repeated short-term working system.
Long-term working system: The working time of the electrical appliance is very long, generally not less than the heating time constant. During the working period, the temperature of the product reaches or is close to the temperature rise limit (the temperature of the product rises). After the work is stopped, the temperature of the product drops to the temperature of the surrounding medium. Long-term working system heat dissipation is the main.
Short-term working system: The working time of the electrical appliance is very short, and one side is less than the heating time constant. During the working period, the temperature of the product does not reach the temperature rise limit. After the work stops, the temperature of the product drops to the temperature of the surrounding medium. The short-term working system (the heat capacity of the product itself) is the main aspect.
Repeated short-term working medium system: the product works and stops alternately, the product temperature does not reach the temperature rise limit when working, and the product does not drop the temperature of the surrounding medium when it stops.
Electromagnet manufacturer, turn the electromagnet clockwise
